Worksheet example 2: daily configuration, 17 matrix 50 series switchers • operation – Extron Electronics Matrix 50 Series User Manual
Page 37
3-17
Matrix 50 Series Switchers • Operation
Worksheet example 2: Daily configuration
Figure 3-17 continues from worksheet example 1 by showing the video and
audio ties that make up the configuration of preset 3, a solid ink line shows video
ties, and a dashed pencil line shows the audio ties. In this example, the image of
the presenter, from the main podium camera (input 1) is displayed on the main
podium monitor (output 6) and taped on the VCR (output 5) for a tape archive.
The audio from the presenter’s microphone (input 4) is also routed to the podium
monitor (output 6) and the VCR (output 5). Videotaped material from two VCRs
(inputs 6 and 7) is displayed on two rear projection displays (outputs 3 and 4).
Classical music from the CD player (input 5) is played on the lunch room stereo
(output 8). Meanwhile security cameras (inputs 2 and 3) are routed to two local
monitors (outputs 1 and 2).
Daily configuration
Input sources
Camera
main
podium
Main
hall
monitor
Fill in the preset number, use colors or dashes, etc. to make connecting lines.
Indicate if the configuration is for Video, Audio, or both.
Preset #
Title:
Video:
Audio:
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
Main
podium
monitor
Lunch
room
stereo
Class
room #1
rear proj
Archive
VCR
Lobby
monitor
3
Class
room #2
rear proj
Security
camera
#2
Lobby
security
camera
Podium
mic
Audio
CD
Class
room #1
VCR
Class
room #2
VCR
Class
room #1
LD
Class
room #2
LD
VTG
200
Output destinations
Figure 3-17 — Worksheet example 2: Daily configuration