Extron Electronics EDID 101H User Guide User Manual
Page 23
EDID 101H • Reference Information
17
4.
Click
Next
.
5.
The following dialog box opens:
4
5
Found New Hardware Wizard
Welcome to the Found New
Hardware Wizard
This Wizard helps you install software for:
If your hardware came with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically [Recommended]
Install from a list or specific location [Advanced]
Click Next to continue
Next >
Cancel
Extron USB Device
Figure 10.
Installing the Software Automatically
Select
Install
the
software
automatically
(Recommended)
.
NOTE: You do not need to insert an installation disc.
6.
Click
Next
.
The PC locates the driver needed and installs it in the correct location on the hard drive.
7.
When the
Completed
dialog opens, click
Finish
to close the wizard.
NOTE: The wizard opens only on the first occasion you connect the EDID 101H
to that USB port. The wizard reopens if you connect the EDID 101H to a different
USB port or if you connect a different piece of equipment, requiring a different
driver, to the same USB port.
8.
Configure the EDID 101H as required (see