Serial communication, cont’d, Control software for windows – Extron Electronics DVS 204 Series User Manual
Page 40
Serial Communication, cont’d
DVS 204 • Serial Communication
3-8
Control Software for Windows
The included Extron DVS 204 Control Program for Windows offers another way
to control the DVS 204 via RS-232 connection in addition to the Simple
Instruction Set commands. The control program’s graphical interface includes
the same functions as those on the scaler’s front panel and some additional
features that are only available through the Windows-based software.
The control software is compatible with Windows 95/98, Windows NT, and
Windows 2000. Extron’s DVS 204 Control Program is included with the scaler,
and updates can be downloaded from the Extron Web site
(http://www.extron.com).
Installing the software
The control program is contained on a set of 3.5-inch diskettes, and it requires
approximately 2 MB (megabytes) of hard disk space.
To install the software on the hard drive:
1
.
Run SETUP.EXE from the floppy disk.
2
.
Follow the instructions that appear on the screen.
By default the installation creates a C:\DVS 204 directory, and it places two icons
(DVS 204 Control Pgm and DVS 204 Help) into a group or folder named “Extron
Electronics”.
Using the control program
Many items found in the DVS 204 Control Program are also accessible via front
panel controls and the LCD menus described in chapter two. Refer to chapter
two for details on features and settings. The DVS 204 Help Program provides
information on settings and on how to use the control program itself. Some
features, including the miscellaneous options, are only available via this control
program. These features are described in the sections of this chapter that
correspond to the parts of the control program where the features are found.
1.
To run the control program, double-click on the DVS 204 Control Pgm icon
in the Extron Electronics group or folder. The Comm menu appears on the
screen.
2.
Click on the comm port that is connected to the DVS 204’s RS-232 port.
The Extron DVS 204 Control Program windows appear.