Extron Electronics DVI-RGB 200 User Guide - Manual (Page 16)

Rack shelf mounting instructions
The unit can be mounted in the front or the rear of the rack.
1. Remove the feet from the bottom of the unit if installed.
2. Mount the unit on the rack shelf, using two 4-40 x 3/16-inch screws in opposite
(diagonal) corners to secure it to the shelf (figure 5).
6" Deep Rack Shelf
Front false
faceplate
uses 2
screws.
1/2 Rack Width Front False
Faceplate
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
Figure 5. Mounting the Unit on a 3-inch Rack Shelf
3. Install blank faceplate(s) or other unit(s) on the rack shelf.
4. Attach the rack shelf to the rack using the supplied bolts.
1U Universal Rack Shelf
Figure 6. Mounting the Unit on a Universal Rack Shelf
DVI-RGB 200 • Reference Information 11