beautypg.com

Extron Electronics DP DA2 User Guide User Manual

Page 25

background image

9.

On the Open window, navigate to the new firmware file, which has an S19 extension,
and double-click it.

Figure 11.

Open Window for Firmware File Selection

ATTENTION: Valid firmware files must have the file extension S19. A file with any

other extension is not a firmware upgrade for this product and could cause the
switcher to stop functioning.

NOTES:

The original factory-installed firmware is permanently available on the
DP DA2. If the attempted firmware upload fails for any reason, the DP DA2
reverts to the factory version.

When downloaded from the Extron website, by default the firmware is
placed in a folder at

C:\Program Files\Extron\Firmware\DP DA2

(Windows XP) or

C:\Program Files (x86)\Extron\Firmware\DP DA2

(Windows 7).

DP DA2 • Updating Firmware

19