Extron Electronics HDMI 101 - Manual (Page 9)

DVI 101 and HDMI 101 • Introduction 1-3
Features
• Power/Signal indicator — The LED on the front panel lights
green to indicate source signal presence and yellow to indicate
power on.
• Source-powering at short distances — The DVI/HDMI
can receive power from an attached input source device,
eliminating the need for power supply installation (see the
table on page 2-8).
• DDC and HDCP copy protection transmission support —
DDC channels are actively buffered, allowing pass-through of
EDID and HDCP information between source and display.
• Enclosure — Compact 1" (2.5 cm) high, 1/8 rack wide metal
enclosure
• Rack and furniture mounting — The equalizers can be
mounted on a rack shelf or under a desk or podium.
• Power supply — An external international power supply with
a two-pin captive screw connector accepts 100 to 240 VAC.
Application Diagrams
The following diagrams show examples of how the DVI 101 and
HDMI 101 can be connected.
Projector
Extron
DVI 101
Equalizer
Long DVI Cable
200’ (61 m) Max.
Laptop with
DVI Output
Short DVI
Patch Cable
POWER
12V
0.4A MAX
DVI 10
1
DVI-D OUTPUT
DVI 101 application diagram