Extron Electronics HDMI 101 - Manual (Page 13)

DVI 101 and HDMI 101 • Installation and Operation 2-3
Rack mounting procedure
For optional rack mounting, mount the DVI/HDMI on one
of the rack shelves listed above. On the standard 9.5" or 6"
deep rack shelf, the equalizer mounts in one of eight possible
locations to the rear of the rack.
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
1/4 Rack Width
Front False
Faceplate
1/2 Rack Width
Front False
Faceplate
Both front false faceplates
use 2 screws.
Mounting the DVI 101 or HDMI 101 on a standard
9.5" deep rack shelf
1 . If rubber feet were previously installed on the bottom of
the unit, remove them.
2 . Secure the DVI/HDMI onto the rack shelf, using two
4-40 x 3/16" screws in opposite (diagonal) corners.
3 . Install blank panel(s) or other unit(s) on the rack shelf as
desired.
4 . Insert the shelf into the rack, aligning the holes in the shelf
with those of the rack.
5 . Secure the shelf to the rack using the supplied machine
screws. This shelf can be mounted in the front or in the
rear of the rack.