Extron Electronics HDMI 101 - Manual (Page 16)

DVI 101 and HDMI 101 • Installation and Operation
Installation and Operation, cont’d
2-6
a
Power/signal status LED — This dual-color LED lights yellow
when the DVI/HDMI is receiving power. When a DVI or HDMI
input signal is present, this LED lights green.
N If the LED does not light when you are attempting to
power the unit from the source device, use an external
power supply instead.
b
DVI input connector (DVI 101 only) — Plug the cable from the
input source device into this single link format female DVI-I
connector. The table and diagrams below show the DVI pin
configuration.
N The analog pins are not implemented.
Pin Signal Pin Signal Pin Signal
1 TMDS data 2– 9 TMDS data 1– 17 TMDS data 0–
2 TMDS data 2+ 10 TMDS data 1+ 18 TMDS data 0+
3 TMDS data 2 11 TMDS data 1 19 TMDS data 0
shield shield shield
4 Spare 12 Spare 20 Spare
5 Spare 13 Spare 21 Spare
6 DDC clock 14 +5 V power 22 TMDS clock
shield
7 DDC data 15 Ground (+5 V) 23 TMDS clock+
8 CEC control 16 Hot plug 24 TMDS clock–
detect
1 8
17 24
9
Female Connector Male Connector
DVI connector pin assignments