Extron Electronics CVEQ1, CVEQ1 WM, CVEQ1 AAP - Manual (Page 7)

CVEQ1 Series • Introduction
Introduction
CVEQ1, CVEQ1 WM, CVEQ1 AAP
2
Chapter Two
Installation, Setup, Operation
UL Requirements
Preparing the Site and Installing the Wall Box
Front Panel Features and Cabling
Rear/Bottom/Side Panel Features and Cabling
Top/Side Panel Features and Adjustments
Mounting the CVEQ1 AAP
Mounting the CVEQ1 WM
About the CVEQ1, CVEQ1 WM, and CVEQ1 AAP
The Extron CVEQ1 is a one-input, one-output, composite video
line driver. It features a 185 MHz (-3 dB) video bandwidth.
It accepts one composite video input on a female BNC connector
and one stereo audio input on a pair of female RCA connectors.
One female BNC connector provides equalized video output,
and a five-pole captive screw connector provides for stereo
audio output.
The Extron CVEQ1 AAP is identical to the CVEQ1, except that it
is designed to be mounted in a double-space height architectural
adapter plate bracket (in a device’s faceplate or in an AAP
wallplate) for installation into a wall or furniture.
The CVEQ1 WM shares the features of the other two models,
but it has a 1-gang faceplate for installation into a UL-approved
electrical wall box set into a wall or furniture.
In this manual “CVEQ”, “CVEQ1”, and “line driver” are used to
refer to all models interchangeably unless otherwise noted.
Features
Stereo audio — Unbalanced stereo audio input can be output as
balanced or unbalanced stereo audio.
Gain adjustment — All models offer a video gain adjustment
with a range of -6 dB to +6 dB.
Equalization adjustment — Each model also features an
equalization adjustment that changes the level and
peaking of the output signal to compensate for use of long
cables. The CVEQ1 series line drivers can drive video
signals through up to 1000 feet (300 meters) of Extron RG6
cable.
1-2