Xylem ProLab 3000 LABORATORY pH METER - Manual (Page 51)

ProLab 3000 Access to the meter
51 ba75645e02 01/2010
5.5 Access control and user rights
You as the administrator define the type of access (assess control) to
the ProLab 3000. In addition, you define the rights to carry out functions
and measurements for the users (user rights).
When the meter is delivered, only the enclosed electronic administrator
key has an access authorization for the meter.
The administrator can set up access authorizations for electronic user
keys (see below).
Anonymous access without password and electronic key (user name,
Anonymous) is always possible. Measurement and calibration data is
identified by the user name, Anonymous.
After the login as administrator, the user management functions are
available in the Access control and Administration register cards of the
User / Administration... menu.
Access control In the Access control register card you define the general access set-
tings that will apply to all users.
User rights Each user is given user rights with the ProLab 3000. The user rights are
limited by the user type and configuration:
User type User rights
Administrator z Calibrate and measure
z Create file for manual storage
z Create user configuration
z Define type of access to the meter
z User administration
z Delete all files
Users
without configura-
tion z Calibrate and measure
z Create file for manual storage
z Create user configuration
z Delete files in their own folder
with configuration z Calibrate and measure
(limited by settings in configuration file)