Xylem ProLab 3000 LABORATORY pH METER - Manual (Page 24)

Commissioning ProLab 3000
24 ba75645e02 01/2010
3.2 Initial commissioning
Perform the following activities:
z Insert the batteries (see page 163)
z Connect the power pack (see page 24).
z Switch on ProLab 3000 (see page 25).
z Connect the USB mouse (see page 26)
z Setting the language (see page 58)
z Set the date and time (see page 59)
z Set up the access authorization for user keys (see page 53)
z Connect the sensor (see page 27).
3.3 Connecting the power pack
The power pack supplies the meter with low voltage (9 V DC).
The batteries are only used to buffer the system time if the power sup-
ply is interrupted.
CAUTION
The line voltage at the operating site must lie within the input
voltage range of the original power pack (see page 169).
CAUTION
Use original power packs only (see page 169).
1 Insert the plug into the socket of the meter.
2 Connect the original power pack to an easily accessible power
outlet.
The self-test, meter designation, software version and subse-
quently the Standby display appear.