Xylem iCE3 GPRS Variant User Manual
Page 22
GPRS iCE
3
, V1.30 User Guide
18
iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857 0810 Fax: +64 7 857 0811 Email: [email protected]
AT^ISDA
System DO® Address
Description:
Defines the iCE
3
System DO® protocol address that is applicable when being called directly
from HydroTel™ 2000 and when operating as a communication gateway device.
Default:
1
Notes:
This parameter can range between 1 and 32767. It must be set correctly when the
scheduled connection mode is used in conjunction with a HydroTel™ base station as this
address is used to identify the incoming call when it is originated from a dynamic IP address.
Mode
Command
Responses
Read
AT^ISDA?
^ISDA: 1
OK
Write
AT^ISDA=1
OK OR ERROR
Help
AT^ISDA=?
^ISDA: 1
OK
6.3.17 AT^ISNO
Serial NO.
Description:
Displays the iCE
3
serial number.
Default:
N/A
Notes:
This command is read only.
Mode
Command
Responses
Read
AT^ISNO?
^ISNO: AE0-0001
OK
6.3.18 AT^IUID
User ID
Description:
Defines the User ID (user name) to use for connecting to the GPRS network.
Default:
“”
Notes:
This user id is sometimes required when connecting via an ISP, but usually left empty when
connecting via a private APN.
Mode
Command
Responses
Read
AT^IUID?
^IUID: “userid”
OK
Write
AT^IUID=”userid”
OK OR ERROR
Help
AT^IUID=?
^IUID: “userid”
OK
AT^IVER
Displays Software VERsion
Description:
Displays the iCE
3
software version.
Default:
N/A
Notes:
This command is read only.
Mode
Command
Responses
Read
AT^IVER?
iCE3 Version: 1.30
Copyright © 2008