Xylem COND3210 HANDHELD CONDUCTIVITY METERS - Manual (Page 26)

Operation Cond 3210
26 ba75794e01 01/2009
4.3.3 Automatic Stability control
The automatic Stability control (AutoRead) function continuously
checks the stability of the measurement signal.
You can activate or switch off the automatic Stability control function
(see section 4.4.4).
The measured parameter flashes on the display
z as soon as the measured value is outside the stability range
z if you switch over between the measured parameters with .
z if the automatic Stability control is switched off.