YSI IQ SensorNet MIQ/A-PR Module - Manual (Page 7)

MIQ/(A-)PR Safety instructions
7 ba76020e01 01/2012
2 Safety instructions
This component operating manual contains special instructions that
must be followed during the installation of the PROFIBUS module.
Thus, it is essential to read this component operating manual before
carrying out any work using this sensor. In addition to this manual, the
S
AFETY chapter of the IQ S ENSOR N ET system operating manual must
be followed.
Always keep this component operating manual together with the
system operating manual and all other component operating manuals
in the vicinity of the IQ S
ENSOR N ET system.
Directions The following symbols indicate special features in the individual
chapters of this operating manual:
Note
indicates notes that draw your attention to special features.
Note
indicates cross-references to other documents, e.g. operating
manuals.
2.1 Authorized use
Authorized use of the MIQ/(A-)PR consists of its use as an interface to
a PROFIBUS.
Please observe the technical specifications according to chapter 6
T
ECHNICAL DATA . Only operation according to the instructions in this
operating manual is authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.