YSI IQ S ENSOR N ET NitraVis 70x IQ - Manual (Page 20)

Commissioning
NitraVis 70x IQ
3 - 10 ba75950e02 11/2012
Cleaning type

Ultrasound
 Air
 Ultrasound+air
Cleaning methods
This menu item is only available with:
Cleaning mode = On
The duration of the cleaning procedure
is defined in the sensor for all cleaning
types.
Note: The duration of the cleaning pro-
cedure with air can be adjusted for the
linked relay in the menu, 150 - Settings
of outputs and links / Relay function
/
Sensorgesteuert
/
Pulsdauer .
Please note the software requirements
for the MIQ/CR3, MIQ/R6, MIQ/CHVP-
lus, DIQ/S 182 relays (see section 3.1).
Save and quit - The system confirms the saving of the
settings and the display switches to the
next higher level.
Quit - The display switches to the next higher
level without saving the new settings.
Menu item Settings Explanations