Xylem IQ SensorNet FDO 70x IQ (SW) - Manual (Page 13)

FDO
®
70x IQ (SW) Commissioning
3 - 1 ba76014e01 02/2012
3 Commissioning
3.1 Scope of delivery
 Sensor, consisting of sensor basis and sensor cap
 Operating manual.
3.2 Installation
Connection cable A sensor connection cable of the SACIQ or SACIQ SW type is required
to connect the sensor. The cable is available in different lengths. Com-
pared to the standard model SACIQ, the SACIQ SW sensor connection
cable is optimized regarding its corrosion resistance in seawater and
brackish water and adapted for use in conjunction with the FDO 70x
IQ SW. Information on this and other IQ S
ENSOR N ET accessories is
given in the YSI catalog and on the Internet.
Note
How to connect the SACIQ (SW) sensor connection cable to the termi-
nal strip of an MIQ module is described in chapter 3 I
NSTALLATION of the
IQ S ENSOR N ET system operating manual.
Are the plug
connections dry?
Before connecting the sensor and sensor connection cable, please
make sure the plug connections are dry. If moisture gets into the plug
connections, first dry the plug connections (dab them dry or blow them
dry using compressed air).
Note
Do not suspend the sensor on the sensor connection cable. Use a sen-
sor holder or armature. Information on this and other IQ S
ENSOR N ET
accessories is given in the YSI catalog and on the Internet.