YSI 3200 - Manual (Page 33)

Data Storage and Retrieval Section 4
RECALL
From the Review menu, press the [RECALL] soft key to enter Recall mode and display the
following menu.
2/19/97 8:45
AM
RECALL
13.15 uS/cm 24.38°
C
record #
[ 0]
69.70
Kohm-cm
0.4
ppt
FULL
K=1.090
1.91%/°C
UP DOWN DIGIT SEND
The Recall menu is used to recall or send data that was previously stored. The current record
number is shown on the right side of the display along with its status.
Use the [UP], [DOWN] and [DIGIT] soft keys to view a different record number.
Press the [SEND] soft key to send the currently displayed record to a computer or serial printer
via the RS232 port. See section 4.3 Send, Send Setup for format.
When you have finished recalling records, press [MODE] two times to return to Operation mode.
SEND ALL
From the Review menu, you may send ALL stored records to a computer or serial printer by
pressing the [SEND ALL] soft key. See section 4.3 Send, Send Setup for format.
CLEAR
From the Review menu, press the [CLEAR] soft key to display the following menu.
2/19/97 8:45
AM
CLEAR
13.15 uS/cm 24.38°
C
record #
[ 0]
69.70
Kohm-cm
0.4
ppt
FULL
K=1.090
1.91%/°C
UP DOWN DIGIT DELETE
The Clear menu is used to delete data that was previously stored. The current record number is
shown in the display on the right side along with its status.
Use the [UP], [DOWN] and [DIGIT] soft keys to select the record that you want to delete. Press
the [DELETE] soft key to delete the selected record.
YSI Incorporated Model 3200 29