Advanced chipset control, Cpu bridge configuration – Acer AT350 F1 User Manual
Page 96
4 System BIOS
84
Advanced Chipset Control
This submenu is used to configure the following sub-items:
CPU Bridge Configuration
Onboard LAN
Option ROM
Select
Select iSCSI to use iSCSI Option ROMs
to boot the computer using a
network device. Select iSCSI to use
PXE Option ROMs to boot the
computer using a network device.
PXE
iSCSI
Boots Graphic
Adapter Boot
Priority
This feature allows the user to select
the graphics adapter to be used as
the primary boot device.
Onboard VGA
Add-on VGA
Parameter
Description
Options
QPI Links Speed
This feature selects QPI's data
transfer speed.
Slow-mode
Full Speed
QPI Frequency
(Available if QPI
Links Speed is set
to Full Speed)
This feature is used to select the
desired QPI frequency.
Auto
4.800 GT
5.866GT
6.400 GT
QPI L0s and L1
Select Enabled to lower the QPI
power state. L0s and L1 are
automatically selected by the
motherboard.
Enabled
Disabled
Memory
Frequency
Use this feature to force a DDR3
memory module to run at a
frequency other than what the
system has detected.
Auto, Force DDR-
800, Force DDR-
1066, Force DDR-
1333, and Force
SPD
Parameter
Description
Options