Acer AT350 F1 - Manual (Page 93)

81
Serial Port Configuration
S.M.A.R.T. Self-Monitoring Analysis and Reporting
Technology (SMART) can help predict
impending drive failures. Select Auto to
allow the AMI BIOS to automatically
detect hard disk drive support. Select
Disabled to prevent the AMI BIOS from
using S.M.A.R.T. Select Enabled to allow
the AMI BIOS to use S.M.A.R.T. to
support the hard-drive disk. Auto,
Disabled,
Enabled,
32Bit Data
Transfer Select Enable to enable the function of
32-bit IDE data transfer. Enabled
Disabled
IDE Detect
Timeout (sec) Use this feature to set the timeout value
for the BIOS to detect the ATA, ATAPI
devices installed in the system.
0 (sec), 5,
10, 15, 20,
25, 30, 35
Parameter Description Options
Serial Port 1
Address This feature allows the user to
specify the base I/O port address and
the Interrupt Request address for
Serial Port 1 or Serial Port 2. Select
Disabled to prevent the serial port
from accessing system resources.
When this option is set to Disabled,
the serial port will become
physically unavailable. Select 3F8/
IRQ4 to allow the serial port to use
3F8 as its I/O port address and IRQ 4
for the interrupt address. Disabled,
3F8/IRQ4,
3E8/IRQ4,
2E8/IRQ3,
2F8/IRQ3
Serial Port 2
Address Disabled,
2F8/IRQ3,
3E8/IRQ4,
2E8/IRQ3,
3F8/IRQ4
Serial Port 2
Attribute Select COM to configure the
onboard COM 2 port as a normal
serial port. Select SOL (Serial
Over_LAN) to confi gure the
onboard COM 2 port as a virtual
COM port for SOL use. SOL
COM
Parameter Description Options