Acer AT350 F1 - Manual (Page 109)

97
IP Address
Source This features allows the user to select how
an IP address is assigned to a client
computer or network device. Select DHCP
(Dynamic Host Confi guration Protocol) to
allow a client (computer or device) to obtain
an IP address from a DHCP server that
manages a pool of IP addresses and network
information on a "request and grant" basis.
Upon timeout (or lease expiration), the IP
address assigned to the client can be
reassigned to a new client. Select Static
(Static Allocation) to allow the host server to
allocate an IP address based on a table
containing MAC Address/IP Address pairs
that are manually entered (such as by a
network administrator). Only clients with a
MAC address listed in the MAC/IP Address
Table will be assigned an IP address. The IP
Address allocated to the client is on a longer
term basis than that assigned by the DHCP
mentioned in the other option. DHCP
Static
IP Address The BIOS will automatically enter the IP address of this
machine; however, it may be overridden. This should be in
decimal and in dotted quad form. The value of each three-
digit number separated by dots should not exceed 255.
Subnet Mask This item displays the current subnet mask setting for your
IPMI connection.
This should be in decimal and in dotted quad form. The
value of each three-digit number separated by dots should
not exceed 255.
Gateway
Address The BIOS will automatically enter the Gateway address of
this machine; however it may be over-ridden. This should be
in decimal and in dotted quad form. The value of each
three-digit number separated by dots should not exceed
255.
Mac Address The BIOS will automatically enter the Mac address of this
machine; however it may be over-ridden. Mac addresses are
6 two-digit hexadecimal numbers (Base 16, 0 ~ 9, A, B, C, D,
E, F) separated by dots.
Parameter Description Options