beautypg.com

Security settings – Acer AR160 F1 User Manual

Page 93

background image

77

Gateway Address - The BIOS will automatically display the
Gateway address of this machine. This should be in decimal and in
dotted quad form (i.e., 192.168.10.253). The value of each three-
digit number separated by dots should not exceed 255.

Mac Address - The BIOS will automatically enter the Mac address
of this machine. Mac addresses are 6 two-digit hexadecimal
numbers (Based 16, 0 to 9, A, B, C, D, E, F) separated by dots. (e.g.,
00.30.48.D0.D4.60).

BMC Watch Dog Timer Action: This feature allows the BMC to reset or
power down the system if the operating system hangs or crashes.

BMC Watch Dog TimeOut [Min:Sec] - This feature appears if BMC
Watch Dog Timer Action (above) is enabled. This is a timed delay
in minutes or seconds before a system power down or reset after
an operating system failure is detected.

Security Settings

The BIOS provides a Supervisor and a User password. If you use both
passwords, the Supervisor password must be set first.

Supervisor Password: This item indicates if a supervisor password has
been entered for the system. Not installed means such a password has
not been used.

User Password: This item indicates if a user password has been entered
for the system. Not installed means such a password has not been used.