Acer AR160 F1 - Manual (Page 92)

4 System BIOS 76
Clear BMC System Event Log
Clear BMC System Log: Select OK and press to clear the BMC
system log. Select Cancel to keep the BMC System log.
Caution: Any cleared information is unrecoverable. Make
absolutely sure that you no longer need any data stored in the log
before clearing the BMC Event Log.
Set LAN Configuration
Use this feature to configure the IPMI LAN adapter with a network
address.
• Channel Number - This item displays the channel number for the
SET LAN Configuration command.
• Channel Number Status - This feature returns the channel status
for the Channel Number selected above: Channel Number is OK or
Wrong Channel Number.
• IP Address Source - Select how an IP address is assigned to a client
computer or network device. Select DHCP (Dynamic Host
Configuration Protocol) to allow a client (computer or device) to
obtain an IP address from a DHCP server that manages a pool of IP
addresses and network information on a request and grant basis.
Select Static (Static Allocation) to allow the host server to allocate
an IP address based on a table containing MAC Address/IP Address
pairs that are manually entered (such as by a network
administrator). Only clients with a MAC address listed in the MAC/
IP Address Table will be assigned an IP address.
• IP Address - The BIOS will automatically display the IP address of
the machine. This should be in decimal and in dotted quad form
(i.e., 192.168.10.253). The value of each three-digit number
separated by dots should not exceed 255.
Note: This feature can be changed by the user when the IP Source
is set to Static.
• Subnet Mask - This item displays the current subnet mask setting
for your IPMI connection. This should be in decimal and in dotted
quad form (e.g., 192.168.10.253). The value of each three-digit
number separated by dots should not exceed 255.