Acer AR160 F1 - Manual (Page 45)

29
Removing and installing an optical drive
The system supports a slim SATA optical drive.
1 Observe the ESD precautions described on page 24.
2 Remove the top cover. See page 33.
3 If an optical drive is present in the system, unplug the power and
data cables from the drive.
4 Locate the locking tab at the rear of the drive.
5 Pull the tab away from the drive and push the drive out of the
system.
6 Insert a new drive. The drive is properly inserted if you hear a click
and the locking tab locks into place.
7 Reconnect the power and data cables to the new optical drive.
Note: I-SATA5 port is reserved for connecting to the installed
optical drive.