Acer AT150 F1 - Manual (Page 87)

75
ATA Controller Configuration
When this submenu is selected, the AMI BIOS automatically detects the
presence of IDE or SATA devices and displays the following items.
Clock Spread
Spectrum Select Enable to enable Clock
Spectrum support, which will allow
the BIOS to monitor and attempt to
reduce the level of Electromagnetic
Interference caused by the
components whenever needed. Enabled
Disabled
Parameter Description Options
SATA#1
Configuration Select Compatible to set SATA#1 to
legacy compatibility mode. Select
Enhanced to set SATA#1 to native SATA
mode. Compatible
Disabled,
Enhanced
Configure
SATA#1 as This feature allows the user to select the
drive type for SATA#1. IDE
RAID
AHCI
ICH RAID
CodeBase
(Available
when the
option-RAID
is selected.) Select Intel to enable Intel's SATA RAID
fi rmware to confi gure Intel's SATA
RAID settings. Select Adaptec to enable
Adaptec's SATA RAID firmware to
configure Adaptec's SATA RAID settings. Intel
Adaptec
SATA#2
Configuration
(Available when
the option IDE is
selected.) Select Enhanced to set SATA#2 to native
SATA mode. Enhanced
Disabled
SATA PORT0~
SATA PORT5 These settings allow the user to set the parameters of
the slots indicated above.
Press to activate the following submenu. Set
the correct confi gurations accordingly. The items
included in the submenu are listed below.
Parameter Description Options