Mirroring mode – Acer AT150 F1 User Manual
Page 65
53
Mirroring mode
•
For mirroring mode, the memory contains a primary image and a
copy of the primary image. Therefore, the effective size of the
memory is reduced by at least one-half.
•
Channel 3 has no function and cannot be populated under this
mode.
•
Follow the population rules described in independent mode.
•
DIMM modules installed in channels 1 and 2 must be identical —
memory modules in slots 1A and 2A should be the same type, size
and manufacturer. The same applies to slots 1B and 2B. However,
it is not necessary for slot A to have the same memory module as
slot B within a channel.
•
The same rule applies to the processor 2.
Memory population for mirroring mode
Single processor configuration
Notes: 1. Place DIMMs in “X” location.
2. DIMM population must correspond to the above tables.
3. DIMM modules support 1 GB, 2 GB and 4 GB DIMMs.
4. DIMM modules support 8 GB DIMMs (support depends
on availability).
5. Do not mix UDIMMs with RDIMMs.
Channel 1
DIMM
slots
Channel 2
DIMM
slots
Channel 3
DIMM
slots
Notes
Configuration
1B
1A
2B
2A
3B
3A
A
X
X
NA
NA
B
X
X
X
X
NA
NA
SR, DR RDIMMs only