C2G 30535 USB 2.0 TO DVI-I ADAPTER User Manual

Page 24

Please note the following information before installation:

Do not plug the USB 2.0 to DVI-I Adapter to your PC or Notebook while executing the set-up or un-

installation program.

The AC power adapter is required for the external USB Hub. Please note that the driver allows up to

6 USB 2.0 to DVI-I Adapters on one PC.

Connect the display device to the DVI connector of USB 2.0 to DVI-I Adapter and switch it on before

plugging it into an available USB 2.0 port of PC or Notebook.

DO NOT reboot the computer until all of USB 2.0 to DVI-I Adapters are installed.

Installing the device driver enables your computer’s operating system to recognize the USB 2.0 to DVI-I
Adapter once it’s connected. Please check your operating system and refer to the appropriate installation
procedure to begin installing the device driver. Please make sure the USB 2.0 to DVI-I Adapter is
unplugged from your PC or notebook before executing the setup program. This section illustrates the
simple device driver installation procedure for a computer running Windows Vista® operating system.

EVICE

NSTALLATION ON

INDOWS

ISTA