AVSL 174.460 CAL-K1 - Manual (Page 6)

174.460UK User Manual
The plastic rear body plate can now be fitted to cover the spring cavity. Secure the plate with dome-head screws into the pre-drilled holes.
Strap buttons
Screw the strap buttons into the pre-drilled holes at the rear edge of the body and at the tip of the upper horn of the body.
Setting up
Fitting strings to the guitar is achieved by threading from the rear, through the sustain block to the front, emerging through the relevant
saddle on the bridge. Start with the thickest string – bottom E – in the uppermost position on the bridge.
Stretch the strings in turn, keeping them straight across the fretboard and into the appropriate groove in the top nut.
Ensure the string sits smoothly over its saddle and keep taut whilst winding a couple of turns on the relevant tuner.
Thread through the string post and bend the string back on itself to anchor it in place. Apply a little tension from the tuner and move on to
the next string, repeating the above process for all 6 strings.