AVSL 130.040 MAM02 User Manual

Page 2

130.040UK User Manual

INSTALLATION:

Before installing, to avoid danger of electric shock, please ensure that all equipment is turned off and
disconnected from the mains supply. This amplifier requires 12Vdc power to operate, the output of
the amplifier needs to be connected to masthead amplifier power supply (130.060UK or 130.061UK)
or to a TV receiver that has 12Vdc power supply on its input.

1. Open the outer casing by pressing the two latches on the side and lift up the cover to

reveal the amplifier.

2. Connect the aerial to input of the amplifier.
3. Connect the output1 of the amplifier to masthead power supply or TV receiver, and

output 2 to secondary TV set or distribution amplifier for further signal distribution.

4. Place the coax lead in the pre-cut groove and close the outer casing lid. Use the cable

tie supplied to secure the amplifier to the mast.

This product is classed as Electrical or Electronic equipment and should not be disposed

with other household or commercial waste at the end of its useful life. The goods must be disposed of

according to your local council guidelines.

Errors and omissions excepted.