Armasight NSMNYX1401F9DA1 NYX-14 FLAG MG Multi-Purpose Night Vision Monocular - Manual (Page 2)

2
The information provided in this manual is for familiarization purposes only. The contents may undergo further
changes with no commitment by Armasight© to notify customers of any updates.
Armasight© assumes no responsibility for any misprints or other errors that this manual may contain.
©2012 by Armasight. All rights reserved.
SAFETY SUMMARY
Before operating this product, carefully read and study this Operation and Maintenance Manual.
The NYX-14 is a precision electron-optical instrument, and requires careful handling. To avoid damage
to the equipment or physical harm to the user when operating the NYX-14, follow all WARNINGS, CAU-
TIONS and NOTES.
Below you will find definitions of the following alerts that appear throughout this Manual:
WARNING — Identifies a clear danger to the person operating the equipment.
CAUTION – Identifies risk of damage to the equipment.
NOTE – Serves to highlight essential procedures, conditions, and statements, or convey important in-
structional data to the user.
WARNING:
This product contains natural rubber latex which may cause allergic reactions! The FDA
has reported an increase in the number of deaths that are associated with an apparent sensitiv-
ity to natural latex proteins. If you are allergic to latex, it is a good idea to learn which products
contain it and strictly avoid exposure to those products.
WARNINGS:
• When installing the unit on a weapon, be sure the weapon is CLEAR and that the SAFETY is on
before proceeding.
• The light from the unit infrared (IR) illuminator is invisible to the unaided eye when used in
total darkness. However, the light can be detected by other Night Vision Devices (NVD).
• To reduce the risk of detection by another NVD, avoid prolonged activation of the IR illumina-
tor.
• The IR light is more detectable by an NVD when used in smoke, fog and rain. Avoid prolonged
activation of the unit IR illuminator in these conditions.
• The intensifier’s phosphor screen contains toxic materials. Please note the following:
— If the intensifier tube breaks, be extremely careful to avoid inhaling the phosphor screen
material. DO NOT allow the material to come in contact with your mouth, eyes, or any open
wounds on the skin.
— If the phosphor screen material comes in contact with your skin, wash it off immediately with
soap and water.
— If you inhale or swallow any phosphor screen material, drink a lot of water, induce vomiting,
and seek medical attention as soon as possible.