Analytical Industries GPR-2600 Series Oxygen Analyzer - Manual (Page 27)

Advanced Instruments Inc.
27
The following menu appears:
ALARM Sample
* Set Alarm 1
Set Alarm 2
Alarm 1 HI
Alarm 2 HI
Alarm 1 ON
Alarm 2 ON
Alarm Timeout
Auto Range 0 to 10 %
85⁰F 100Kpa 12/31/07 12:00:00
Advance the cursor (*) to the “Set Alarm 1” option and press the green ENTER key to accept the selection.
The following menu appears:
Sample
20%
Press UP or DOWN
to change value
ENTER to Save
ESC to Return
Auto Range 0 to 10 %
85⁰F 100Kpa 12/31/07 12:00:00
Follow the prompt above and press the ENTER key to save the alarm value (% full scale) or ESC to return to the MAIN MENU.
Within a few seconds after pressing the ENTER key, the system returns to the MAIN MENU.
Repeat the above steps for “Set Alarm 2”.
Configure Alarm 1 and Alarm 2 by advancing the cursor (*) to the desired feature as illustrated below.
ALARM Sample
Set Alarm 1
Set Alarm 2
* Alarm 1 HI / LO
* Alarm 2 HI / LO
* Alarm 1 ON / OFF
* Alarm 2 ON / OFF
Alarm Timeout
Auto Range 0 to 10 %
85⁰F 100Kpa 12/31/07 12:00:00
Press the ENTER key to toggle between the settings: HI and LO and/or ON and OFF.
After toggling, the system returns to the MAIN MENU. To confirm selection, re-access the ALARM menu above.