Asus P4B533-E - Manual (Page 51)

ASUS P4B533-E motherboard user guide 2-23
11. RAID setting (3-pin RAID_SW) (on RAID models only)
This jumper allows you to enable or disable the onboard PRI_RAID
and SEC_RAID connectors. Keep the default setting (pins 1-2) if you
wish to use RAID configuration. Set to pins 2-3 to disable the
connectors.
12. IEEE 1394 setting (3-pin 1394_SW) (on 1394 models only)
This jumper allows you to enable or disable the onboard IEEE 1394
controller and the two 1394 connectors. Keep the default setting (pins
1-2) if you installed the bundled ASUS 1394 module.
P4B533-E
®
P4B533-E PROMISE Setting
RAID_SW
Enable Disable
(Default)
1 2 2 3
P4B533-E
®
P4B533-E 1394HEAD Setting
1394_SW
Enable Disable
(Default)
1 2 2 3