Asus P8Z77-I DELUXE/WD - Manual (Page 92)

3-26 Chapter 3: BIOS setup
Chapter 3
3.6 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
UEFI BIOS Utility - Advanced Mode
Scroll down to display the following items:
Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc.
CPU Temperature +73ºC / +163ºF
MB Temperature +31ºC / +87ºF
CPU Fan Speed 4192 RPM
Chassis Fan Speed N/A
CPU Voltage +0.832 V
3.3V Voltage +3.264 V
5V Voltage +5.160 V
12V Voltage +12.000 V
CPU Q-Fan Control Enabled
CPU Fan Speed Low Limit 200 RPM
CPU Fan Profile Standard
Chassis Q-Fan Control Enabled
Chassis Fan Speed Low Limit 600 RPM
F10: Save ESC: Exit
F12: Print Screen
CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A]
Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU, chassis,
and power fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignore if you do not wish to display the detected
speed.
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
Chassis Fan Profile Standard
Anti Surge Support Enabled