Setting up your display, Setting up your display -2, Chapter 5 – Asus P8Z77-I DELUXE/WD User Manual
Page 168: I-mode, D-mode
5-2
Chapter 5: Multiple GPU technology support
Chapter 5
i-Mode
To use LucidLogix Virtu MVP in i-Mode, the display must be connected to the onboard video
output.
Ensure to set the Primary Display to iGPU in BIOS to activate i-Mode support.
d-Mode
To use LucidLogix Virtu MVP in d-Mode, the display must be connected to the installed
graphics card.
Ensure to set the Primary Display to PCIE or PCIE/PCI in BIOS to enable
d-Mode support.
d-Mode is recommended for an enhanced 3D gaming performance.
•
•
Setting up your display
LucidLogix Virtu MVP solution comes with two distinct modes that allows you to enjoy better
graphics either from your built-in video output (i-Mode) or from a discrete graphics card
(d-Mode).
d-Mode (VGA output from
discrete graphics card)
i-Mode (VGA output
from motherboard)
The motherboard’s IO ports and discrete graphic card is for reference only and may vary in
different models.