Set dm_lan1 configuration, View bmc system event log, Bios ehci hand-off [enabled – Asus RS924A-E6/RS8 User Manual
Page 98: Configuration options: [dhcp mode] [static mode

5-30
Chapter 5: BIOS setup
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
LAN1 Configuration
Current IP address in BMC:
000.000.000.000
Current Subnet Mask in BMC: 000.000.000.000
Current Gateway Address in BMC: 000.000.000.000
Current MAC address in BMC: 00.00.00.00.00.00
IP Address Source
[Static Mode]
IP Address
[000.000.000.000]
Subnet Mask
[000.000.000.000]
Gateway Address
[000.000.000.000]
←→
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
DHCP Mode
Static Mode
BIOS EHCI Hand-Off [Enabled]
Configuration options: [DHCP Mode] [Static Mode]
IP Address [000.000.000.000]
Enter IP Address in decimal in the form of XXX.XXX.XXX.XXX (XXX less than 256
and in decimal only).
Subnet Mask [000.000.000.000]
Enter Subnet Mask in decimal in the form of XXX.XXX.XXX.XXX (XXX less than
256 and in decimal only).
Gateway Address [000.000.000.000]
Enter Gateway Address in decimal in the form of XXX.XXX.XXX.XXX (XXX less
than 256 and in decimal only).
Set DM_LAN1 Configuration
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
BIOS SETUP UTILITY
Server
Total Number Of Entries: 900
SEL Entry Number:
[1]
SEL Record ID:
001
SEL Record Type:
02 (System Event)
Event Timestamp:
Jul 10, 2011 08:49:20
Generator ID:
0020
Event Message Rev:
04 (IPMI ver 1.5)
Event Sensor Type:
02 (Voltage)
Event Sensor Number:
46 (Fan divisor 1)
Event Dir Type:
81
Event Data:
57 95 97
←→
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Use +/- to traverse
the event log.
View BMC System Event Log