Asus RS924A-E6/RS8 User Manual

Page 88

5-20

Chapter 5: BIOS setup

SATA-AHCI Ports Auto Clk Ctrl [Disable]

When set to [Enabled], the system will turn off the clocks for the unused SATA

ports in AHCI modes. Doing so will enable some power savings.

Configuration options: [Disable] [Enabled]

The hot-plug function will be disabled when turning off the clock for the SATA

port.

SATA PORT0/1/2/3/4/5 MODE [Auto]

When set to [GEN1], the SATA prot will run at GEN1 mode. Setting to [Auto]

will leave the SATA port to run at the default mode.

Configuration options: [Auto] [GEN1]

HPET MSI [Disabled]

Configuration options: [Disabed] [Enabled]

OHCI HC (Bus 0 Dev 18 Fn 0) [Enabled]