beautypg.com

Asus RS924A-E6/RS8 User Manual

Page 44

background image

Chapter 2: Hardware setup

2-22

7. Locate the PIKE RAID card slot on

the motherboard, then remove the

screw besides the PIKE slot.

8. Insert the RAID card into the PIKE

RAID card slot. Ensure that it is

completely seated on the PIKE

RAID card slot.Align the golden

fingers of the RAID card with the

PIKE RAID card slot, then secure

the screw.

5. Note the correct alignment of the

back of the raiser card to the three

holes on the card bracket. Then

secure the Battery Backup Unit to

the bracket from the botton by using

the provided screws.

6. Connect the other end of the cable to the PIKE card.

This manual is related to the following products: