Asus RS924A-E6/RS8 - Manual (Page 134)

7-10 Chapter 7: Driver installation
Red Hat ® Enterprise Linux OS 5.4/5.5
To install the RAID controller driver when installing Red Hat ® Enterprise OS:
1. Boot the system from the Red Hat ® OS installation CD.
2. At the boot:, type linux dd
3. Press .
- To install or upgrade in graphical mode, press the key.
- To install or upgrade in text mode, type: linux text .
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
4. Select Yes using the key when asked if you have the driver disk, then
press .
Main Menu
Do you have a driver disk?
Yes No
5. Insert the Red Hat ® Enterprise RAID driver disk to the floppy disk drive, select
OK, then press .
The drivers for the RAID card are installed to the system.
Insert Driver Disk
Insert your driver disk into /dev/fd0
and press “OK” to continue.
OK Back