Asus RS924A-E6/RS8 - Manual (Page 43)

2-21 ASUS RS920A-E6/RS8; RS924A-E6/RS8
2.8.3 Installing ASUS PIKE RAID card (optional)
Follow the steps below to install an optional ASUS RAID card on your motherboard.
If you install the PIKE 2108 Series SAS RAID card, follow steps 1 and 2 to remove
the outer heatsink on RAID card.
3. Connect one end of the cable to the
Battery Backup Unit.
4. Slide the rest of the cable through
the slot on the card bracket. Put the
Battery Backup Unit in place.
1. Remove the two screws that secure
the heatsink bracket on the back of
the SAS RAID card.
Heatsink bracket
2. Remove the two screws that
secure the outer heatsink on the
front of the SAS RAID card.
DO NOT remove the inner
heatsink from the SAS RAID
card.