Asus M4A79XTD EVO/USB3 - Manual (Page 77)

ASUS M4A79XTD EVO 3-21
Chapter 3
3.6 Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press to display the configuration options.
3.6.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[Auto]
The system automatically configures the ACPI suspend mode.
[S1 (POS) only] Sets the APCI suspend mode to S1/POS (Power On Suspend).
[S3 only]
Sets the APCI suspend mode to S3/STR (Suspend To RAM).
3.6.2 ACPI 2.0 Support [Enabled]
[Disabled] When set to [Disabled], the system will not add additional tables as per
ACPI 2.0 specifications.
[Enabled] When set to [Enabled], the system adds additional tables as per ACPI 2.0
specifications.
3.6.3 ACPI APIC Support [Enabled]
[Disabled] When set to [Disabled], the system disable the Advanced Configuration and
Power Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC).
[Enabled] When set to [Enabled], the ACPI APIC table pointer is included in the RSDT
pointer list.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Suspend Mode [Auto]
ACPI 2.0 Support [Enabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit