4 onboard devices configuration, Onboard devices configuration -18, Chapter 3 – Asus M4A79XTD EVO/USB3 User Manual
Page 74: Primary display adapter [gfx-gpp-pci, Onboard hd audio [enabled

3-18
Chapter 3: BIOS setup
Chapter 3
DRAM ECC Enable [Disabled]
[Disabled]
Disables this function.
[Enabled]
Allows hardware to report and correct memory errors automatically, maintaining
system integrity.
DRAM SCRUB REDIRECT [Disabled]
[Disabled]
Disables this function.
[Enabled]
Allows the system to correct the DRAM ECC errors immediately when they occur.
4-Bit ECC Mode [Disabled]
[Disabled]
Disables the CHIPKILL ECC mode.
[Enabled]
Enables the CHIPKILL ECC mode.
DRAM BG Scrub [Disabled]
Disables or sets the DRAM BG Scrub.
Configuration options: [Disabled] [40ns] [80ns] [160ns] [320ns] [640ns] [1.28us] [2.56us] [5.12us]
[10.2us] [20.5us] [41.0us] [81.9us] [163.8us] [327.7us] [655.4us] [1.31ms] [2.62ms] [5.24ms]
[10.49ms] [20.97ms] [42.00ms] [84.00ms]
Data Cache BG Scrub [Disabled]
Disables or sets the Data Cache BG Scrub. This item allows the L1 Data Cache RAM to be
corrected when idle.
Configuration options: [Disabled] [40ns] [80ns] [160ns] [320ns] [640ns] [1.28us] [2.56us] [5.12us]
[10.2us] [20.5us] [41.0us] [81.9us] [163.8us] [327.7us] [655.4us] [1.31ms] [2.62ms] [5.24ms]
[10.49ms] [20.97ms] [42.00ms] [84.00ms]
L2/L3 Cache BG Scrub [Disabled]
Disables or sets the L2/L3 Cache BG Scrub. This item allows the L2/L3 Data Cache RAM to be
corrected when idle.
Configuration options: [Disabled] [40ns] [80ns] [160ns] [320ns] [640ns] [1.28us] [2.56us] [5.12us]
[10.2us] [20.5us] [41.0us] [81.9us] [163.8us] [327.7us] [655.4us] [1.31ms] [2.62ms] [5.24ms]
[10.49ms] [20.97ms] [42.00ms] [84.00ms]
Primary Display Adapter [GFX-GPP-PCI]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [GFX-GPP-PCI] [GPP-GFX-PCI] [PCI-GFX-GPP]
3.5.4
Onboard Devices Configuration
Onboard HD Audio [Enabled]
[Enabled]
Enables the onboard High Definition Audio Controller.
[Disabled]
Disables the controller.
OnBoard Devices Configuration
Onboard HD Audio
[Enabled]
Front Panel Type
[HD]
Marvell IDE
[Enabled]
Marvell IDE Boot ROM
[Enabled]
Onboard LAN
[Enabled]
Onboard LAN Boot ROM
[Disabled]
Onboard 1394
[Enabled]
Serial Port1 Address
[3F8/IRQ4]
Disabled
Enabled
BIOS SETUP UTILITY
Advanced
Options