Asus M4A79XTD EVO/USB3 - Manual (Page 54)

2-34 Chapter 2: Hardware information
Chapter 2
2.7.4. ASUS Q-Connector (system panel)
Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables.
1. Connect the front panel cables to the ASUS
Q-Connector.
Refer to the labels on the Q-Connector to
know the detailed pin definitions, and then
match them to their respective front panel
cable labels.
2. Install the ASUS Q-Connector to the system
panel connector, ensuring the orientation
matches the labels on the motherboard.
3. The front panel functions are now enabled.
The figure shows the Q-Connector is properly
installed on the motherboard.
The labels on the front panel cables
may vary depending on the chassis
model.
IDE_LED
POWER
SW
RESET SW
IDE_LED-
IDE_LED+
PWR
Reset
Ground
Ground