Asus M4A79XTD EVO/USB3 - Manual (Page 75)

ASUS M4A79XTD EVO 3-19
Chapter 3
The following item appears only when you set the Onboard HD Audio item to [Enabled].
Front Panel Type [HD]
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97.
[HD] Sets the front panel audio connector (AAFP) mode to high definition audio.
Marvell IDE [Enabled]
[Enabled] Enables the Marvell IDE controller.
[Disabled] Disables the controller.
The following item appears only when you set the Marvell IDE item to [Enabled].
Marvell IDE Boot ROM [Disabled]
[Enabled] Enables the Marvell IDE Boot ROM.
[Disabled] Disables the Marvell IDE Boot ROM.
Onboard LAN [Enabled]
[Enabled] Enables the onboard LAN controller.
[Disabled] Disables the onboard controller.
The following item appears only when you set the Onboard LAN item to [Enabled].
Onboard LAN Boot ROM [Disabled]
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
Onboard 1394 [Enabled]
[Enabled] Enables the onboard 1394 device support.
[Disabled] Disables the onboard 1394 device support.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
3.5.5 USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press to display the configuration options.
USB Configuration
Module Version - 2.24.5-13.4
USB Devices Enabled:
None
USB Support [Enabled]
Legacy USB Support [Auto]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS SETUP UTILITY
Advanced
Disabled
Enabled
Options