Asus P5QL/EPU - Manual (Page 62)

2-24 Chapter 2: BIOS setup
2.8.3. AI.NET.2
Check.Realtek.LAN.cable.[Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
2.8.4 ASUS O.C. Profile
Save to Profle 1/2
Allows you to save the current BIOS file to the BIOS Flash. Press to save the file.
Load from Profile 1/2
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press to
load the file.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press to run the utility.
• This function can support devices such as USB flash disk or floppy disk with FAT
32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
2.9. Exit.menu
The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Pressing does not immediately exit this menu. Select one of the options from this
menu or from the legend bar to exit.
Exit.&.Save.Changes
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved to the CMOS RAM. An onboard backup battery
sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this
option, a confirmation window appears. Select OK to save changes and exit.