Asus P5QL/EPU - Manual (Page 32)

1-22 Chapter 1: Product introduction
4.. Serial.ATA.connectors.(7-pin.SATA1-6)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
SATA1
G N D
RSATA_TXN1 RSATA_TXP1
G N D
RSATA_RXN1 RSATA_RXP1
G N D
SATA2
G N D
RSATA_TXN2 RSATA_TXP2
G N D
RSATA_RXN2 RSATA_RXP2
G N D
SATA3
G N D
RSATA_TXN3 RSATA_TXP3
G N D
RSATA_RXN3 RSATA_RXP3
G N D
SATA4
G N D
RSATA_TXN
4
RSATA_TXP4
G N D
RSATA_RXN4 RSATA_RXP4
G N D
SATA5
G
N D
RSATA_TXN5 RSATA_TXP5
G
N D
RSATA_RXN
5
RSATA_RXP5
G
N D
SATA6
G
N D
RSATA_TXN6 RSATA_TXP6
G
N D
RSATA_RXN6 RSATA_RXP6
G
N D
P5QL/EPU
P5QL/EPU SATA connectors
Connect the right-angle side of SATA
signal cable to SATA device. Or you
may connect the right-angle side of
SATA cable to the onboard SATA
port to avoid mechanical conflict with
huge graphics cards.
right-angle.side
5.. CPU,.chassis,.and.power.fan.connectors.
(4-pin.CPU_FAN,.3-pin.CHA_FAN,.3-pin.PWR_FAN)
The fan connectors support cooling fans of 350 mA~2000 mA (24 W max.) or a total
of 1 A~7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of
the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
P5QL/EPU
P5QL/EPU fan connectors
PWR_FAN
GND
+12V
Rotation
CHA_FAN
GND
+12V
Rotation
Only the CPU fan supports the ASUS Q-FAN feature.