Asus M5A97 LE R2.0 - Manual (Page 74)

3-20 Chapter 3: BIOS setup
Chapter 3
Azalia Front Panel [HD]
Allows you to set the Azalia front panel audio connector (AAFP) type to legacy AC’97
or high-definition audio depending on the audio standard that the front panel audio
module supports.
[HD] Sets the front panel audio connector (AAFP) mode to high definition
audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF]
Sets to [SPDIF] for SPDIF audio output.
[HDMI] Sets to [HDMI] for HDMI audio output.
3.5.8 APM
ErP Ready [Disabled]
[Disabled] Disables the Energy Related Products (ErP) Ready function.
[Enabled] Allows BIOS to switch off some power at S5 state to get system ready for
the ErP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
The following items appear only when you set the ErP Ready to [Disabled].
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Device [Disabled]
[Disabled] Disables the PS/2 devices from generating a wake event.
[Enabled] Enables the PS/2 devices to generate a wake event.
Power On By PME [Disabled]
[Disabled] Disables the PME devices from generating a wake event.
[Enabled] Enables the PME devices to generate a wake event.
Power On By Ring [Disabled]
[Disabled] Disables Ring to generate a wake event.
[Enabled] Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/
Second will become user-configurable with set values.