Asus M5A97 LE R2.0 - Manual (Page 70)

3-16 Chapter 3: BIOS setup
Chapter 3
SVM [Enabled]
Enable AMD virtualization in CPU. This secure virtual mode will let you run multiple OS
(guest) on the same physical hardware by decoupling OS and physical hardware with the
hypervisor layer. Configuration options: [Enabled] [Disabled]
Core C6 State [Enabled]
Enables or disables Core C6 state function. Configuration options: [Disabled] [Enabled]
HPC Mode [Enabled]
Allows you to disable or enable High Performance Computing Mode. Configuration options:
[Enabled] [Disabled]
Apm Master Mode [Auto]
Enables or disables Application Power Management. Configuration options: [Auto] [Disabled]
[Enabled]
3.5.2 North Bridge
IOMMU [Disabled]
Allows you to disable or enable the IOMMU. IOMMU is supported on Linux based systems to
convert 32bit I/O to 64bit MMIO. Configuration options: [Disabled] [Enabled]
Memory Configuration
Allows you to set the related memory configurations.
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Configuration options: [Auto]
[Disabled]
Channel Interleaving [Auto]
Allows you to enable the channel memory interleaving. Configuration options:
[Disabled] [Auto]
ECC Mode [Enabled]
Allows you to enable or disable the ECC mode. Configuration options: [Disabled]
[Enabled]
Power Down Enable [Disabled]
Allows you to enable or disable the DDR power down mode. Configuration options:
[Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Enabled]
Allows you to select unganged mode or ganged mode. Configuration options:
[Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the primary boot graphic controller. Configuration options: [PEG/PCI]
[PCI/PEG]