Asus M5A97 LE R2.0 - Manual (Page 65)

ASUS M5A97 LE R2.0 3-11
Chapter 3
HT Link Speed [Auto]
Allows you to select the HyperTransport link speed. Configuration options: [Auto] [800MHz]
[1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz] [2200MHz] [2400MHz]
CPU Spread Spectrum [Auto]
[Auto] Automatic configuration.
[Disabled] Enhances the CPU bus frequency overclocking ability.
[Enabled] Sets to [Enabled] for EMI control.
PCIe Spread Spectrum [Auto]
[Auto] Automatic configuration.
[Disabled] Enhances the PCIE overclocking ability.
[Enabled] Sets to [Enabled] for EMI control.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
EPU Setting [Auto]
This item appears only when The EPU Power Saving Mode is set to [Enabled] and
allows you to set power saving mode. Configuration options: [Auto] [Light Power
Saving Mode] [Medium Power Saving Mode] [Max Power Saving Mode]
OC Tuner
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM.
Press to start auto tuning. It takes around five minutes, and the system will reboot for
several times until auto tuning is completed.Configuration options: [CANCEL] [O�] Configuration options: [CANCEL] [O�]
The configuration options for the following sub-items vary depending on the CPU/DIMMs
you install on the motherboard.
DRAM Timing Control
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [4 CL�] – [12 CL�]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [5 CL�] – [12 CL�]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [5 CL�] – [12 CL�]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [15 CL�] – [30 CL�]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [4 CL�] [5 CL�] [6 CL�] [7 CL�]
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [4 CL�] [5 CL�] [6 CL�] [7 CL�]
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [4 CL�] [5 CL�] [6 CL�] [7 CL�]
•