Restore on ac power loss [enabled, Pwr button < 4 secs [instant-off, Wol (pme#) from soft-off [enabled – Asus A8N-SLI User Manual
Page 67: Wor (ri#) from soft-off [enabled
A S U S A 8 N - S L I
A S U S A 8 N - S L I
A S U S A 8 N - S L I
A S U S A 8 N - S L I
A S U S A 8 N - S L I
2 - 2 9
2 - 2 9
2 - 2 9
2 - 2 9
2 - 2 9
2.5.1
2.5.1
2.5.1
2.5.1
2.5.1
APM configuration
APM configuration
APM configuration
APM configuration
APM configuration
This menu shows the Advanced Power Management (APM) configuration
settings. Select an item then press
the configuration options.
APM Configuration
Restore on AC Power Loss
[Enabled]
PWR Button < 4 secs
[Instant-Off]
WOL (PME#) From Soft-Off
[Enabled]
WOR (RI#) From Soft-Off
[Enabled]
Power-On by Alarm
[Disabled]
x
Date (of Month)
0
x
Time (hh:mm:ss) Alarm 0 : 0 : 0
Power Up By PS2 Keyboard
[Disabled]
Power Up By PS2 Mouse
[Disabled]
Restore on AC Power Loss [Enabled]
Restore on AC Power Loss [Enabled]
Restore on AC Power Loss [Enabled]
Restore on AC Power Loss [Enabled]
Restore on AC Power Loss [Enabled]
Allows you to set whether or not to reboot the system after power
interruptions. [Disabled] leaves your system off while [Enabled] reboots
the system. Configuration options: [Disabled] [Enabled]
PWR Button < 4 secs [Instant-Off]
PWR Button < 4 secs [Instant-Off]
PWR Button < 4 secs [Instant-Off]
PWR Button < 4 secs [Instant-Off]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more
than 4 seconds. Configuration options: [Suspend] [Instant-Off]
WOL (PME#) From Soft-Off [Enabled]
WOL (PME#) From Soft-Off [Enabled]
WOL (PME#) From Soft-Off [Enabled]
WOL (PME#) From Soft-Off [Enabled]
WOL (PME#) From Soft-Off [Enabled]
Allows you to enable or disable the Wake-On-LAN feature. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
WOR (RI#) From Soft-Off [Enabled]
WOR (RI#) From Soft-Off [Enabled]
WOR (RI#) From Soft-Off [Enabled]
WOR (RI#) From Soft-Off [Enabled]
WOR (RI#) From Soft-Off [Enabled]
Allows you to enable or disable the Wake-On-Ring feature. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Select Menu
Item Specific Help
Press [Enter] to select
whether or not to
restart the system after
AC power loss.