beautypg.com

3 pcipnp pcipnp pcipnp pcipnp pcipnp – Asus A8N-SLI User Manual

Page 58

background image

2 - 2 0

2 - 2 0

2 - 2 0

2 - 2 0

2 - 2 0

C h a p t e r 2 : B I O S s e t u p

C h a p t e r 2 : B I O S s e t u p

C h a p t e r 2 : B I O S s e t u p

C h a p t e r 2 : B I O S s e t u p

C h a p t e r 2 : B I O S s e t u p

2.4.3

2.4.3

2.4.3

2.4.3

2.4.3

PCIPnP

PCIPnP

PCIPnP

PCIPnP

PCIPnP

The items in this menu show the PCIPnP configuration settings. Select an
item then press to display a pop-up menu with the configuration
options.

PCIPnP

Plug & Play O/S

[Yes]

Init Display First

[PCIEx]

Resources Controlled By

[Auto]

x

IRQ Resources

PCI/VGA Palette Snoop

[Disabled]

Plug & Play OS [Yes]

Plug & Play OS [Yes]

Plug & Play OS [Yes]

Plug & Play OS [Yes]

Plug & Play OS [Yes]

Select [Yes] if you are using a Plug and Play capable operating system.
Select [No] if you need the BIOS to configure non-boot devices.
Configuration options: [No] [Yes]

Init Display First [PCIEx]

Init Display First [PCIEx]

Init Display First [PCIEx]

Init Display First [PCIEx]

Init Display First [PCIEx]

Allows you to select which graphics controller to use as the primary boot
device. Configuration options: [PCI slot] [PCIEx]

Resources Controlled By [Auto

Resources Controlled By [Auto

Resources Controlled By [Auto

Resources Controlled By [Auto

Resources Controlled By [Auto

When set to [Auto(ESCD)], this allows the BIOS to automatically configure
all the boot and Plug and Play devices. When set to [Manual], you can
assign the available IRQ resources to the PCI devices.
Configuration options: [Auto] [Manual]

Select Menu

Item Specific Help

Select Yes if you are
using a Plug and Play-
capable operating
system. Select No if
you need the BIOS to
configure non-boot
devices.

MTRR mapping mode [Continuous]
Sets the MTRR mapping mode.
Configuration options: [Continuous] [Discrete]

Errata 94 Enhanced [Auto]

Errata 94 Enhanced [Auto]

Errata 94 Enhanced [Auto]

Errata 94 Enhanced [Auto]

Errata 94 Enhanced [Auto]

Configuration options: [Auto] [Disabled]