Asus P5LD2-X/1333 - Manual (Page 80)

-22 Chapter : BIOS setup
DRAM # Activate to Precharge [15 Clocks]
Configuration options: [4 Clocks] [5 Clocks] ~ [18 Clocks]
DRAM Write Recovery Time [4 Clocks]
Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] [6 Clocks]
Hyper.Path.3.[Auto]
Allows you to enable or disable the ASUS Hyper Path 3 feature. Configuration
options: [Disabled] [Enabled] [Auto]
DRAM.Throttling.Threshold.[Auto]
Enable DRAM Throttling Thermal Throttling will make your system more stable.
Configuration options: [Disabled] [Auto]
Booting.Graphic.Adapter.Priority.[PCI.Express/PCI]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI Express/ /PCI Express]
PEG.Buffer.Length.[Auto]
Sets the length of the PCI Express graphics card buffer.
Configuration options: [Auto] [Long] [Short]
Link.Latency.[Auto]
Sets the PCI Express graphics card link latency.
Configuration options: [Auto] [Slow] [Normal]
PEG.Root.Control.[Auto]
Allows you to enable, disable, or set to automatic the PCI Express graphics card
root control. Configuration options: [Auto] [Disabled] [Enabled]
Slot.Power.[Auto]
Sets the PCI Express graphics card slot power.
Configuration options: [Auto] [Light] [Normal] [Heavy] [Heavier]
High.Priority.Port.Select.[Disabled]
Allows you to disable or select the high priority port. The specified high priority port
will be given arbitration above but below .
Configuration options: [Disabled] [PCI Express Port 4]